Flooring production line for laminate flooring
This line includes Five sections
1. Material-in conveing line
2. Two-track longitudinal double end tenoner
3. Middle Automatic material-feeding conveying line
4. Transversal double-end tenoner
5. Floor-turning equipment
Special explanation :The line’s requirements of needed corollary
equipment
1. The diameter of outside dust collection port120mm
2.The required wind speed for suction air flow: 35m/second
3.The required total blowing rate for dedusting: 30000m3/hour.
4. Compressed air：6Bar 5000NL/Min
5. working voltage：380V
6. floor area for the Line: 20m×12m=240 ,the standard turn is
left-turn
1st part:Material-in conveing line
1 Function
Continuous feed the mult-board
2 Features
- It is equipped with Locator feed binlateral Vibration Absorbing
backer and guide on both side of Roller Conveyer, to ensure that
the mult-board can be conveyed into the longitudinal double end
tenoner continuously and steadily
3 Technical parameters：
No. | Description | Unit | value | Remark |
1 | Motor power | KW | 1.1 | |
2 | Length | mm | 2400 | |
3 | Width | mm | 300 | |
4 | Speed | m/min | 40～80 | |
2nd part: Single rail double open longitudinal double end tenoner
MQ3201Z
1、Single rail double open longitudinal double end tenoner MQ3201Z
1.1、Feature of Single rail double open longitudinal double end
tenoner MQ3201Z
（1）Adopts six processing positionten high-speed motor spindle, fully meet the processing of
different grooves and tongues flooring needs.
（2）Single-rail feed structure,Double open adjustment
Double-open means: knife axle, knife-tip clamp, small platform,,
can be adjusted synchronously as per customer’s requirement only in
one time. No need to adjust them separately. Reduce the knife
adjustment time. Adjustment is very easy especially for processing
different width flooring.
（3）Adopts screw-nut-rotating width adjustment, which can eliminate
the moving gap from rotating screw to ensure the width adjustment
precision.
（4）Adopts U-shape rail bearing chain, the rail is a wear-resistant
part, bearing adopts special anti-dust structure, so the dustproof
effect is obvious.
